Canon printer change ink cartridge is actually something that we can do very easily. Yes, printer is like a part of our life anyway. Whether you are students, employers, or even the boss, there will be so many activities that need printer. However, it often becomes a big problem if the ink of your printer is already empty or damaged. Of course, you don’t have any other choices except changing it. Interestingly, it is actually not difficult to do. There are some steps you can follow so that your printer can be used again. Check them out.
Certainly, before starting to change it, we have to ensure that this is the time to change it. Moreover, it is by remembering that the price of cartridge itself is quite expensive. You can test it by head cleaning it. If the printing results lines which are not connected each others, you may reset the cartridge at first. Of course, if the result is still the same, it means that there is something wrong to your ink cartridge. It is not bad to think about buying the new one.
You will need some things including the new cartridge and rubber band for infusion. Sure, there are some tools needed as well like cutter and small drill. If the rubber band for infusion is still in a good condition, you don’t need to change it. It means you only need a new cartridge to replace the damaged one.
The new cartridge should be drilled at first on the part where the ink will be flowing out. It is better to use drill with diameter 3 mm which is considered being more appropriate for your cartridge. If it is needed, you can cut the outer sticker so that the infusion can be simpler to be inserted. You can use your old infusion tube and wait it for minutes to make it become air-tight. The last step is by inserting the tube into the new cartridge after releasing it from the older one. Don’t forget to release the orange tape. So, it is so easy, isn’t it?
Make sure that the printer is closed well before starting to use. When you turn on the printer, a good placement of cartridge can be indicated by the well movement. Finally, you can try to print your work out.
Making sure that it is really needed to change
Certainly, before starting to change it, we have to ensure that this is the time to change it. Moreover, it is by remembering that the price of cartridge itself is quite expensive. You can test it by head cleaning it. If the printing results lines which are not connected each others, you may reset the cartridge at first. Of course, if the result is still the same, it means that there is something wrong to your ink cartridge. It is not bad to think about buying the new one.
Prepare the things needed
You will need some things including the new cartridge and rubber band for infusion. Sure, there are some tools needed as well like cutter and small drill. If the rubber band for infusion is still in a good condition, you don’t need to change it. It means you only need a new cartridge to replace the damaged one.
Start to Change the Cartridge
The new cartridge should be drilled at first on the part where the ink will be flowing out. It is better to use drill with diameter 3 mm which is considered being more appropriate for your cartridge. If it is needed, you can cut the outer sticker so that the infusion can be simpler to be inserted. You can use your old infusion tube and wait it for minutes to make it become air-tight. The last step is by inserting the tube into the new cartridge after releasing it from the older one. Don’t forget to release the orange tape. So, it is so easy, isn’t it?
Make sure that the printer is closed well before starting to use. When you turn on the printer, a good placement of cartridge can be indicated by the well movement. Finally, you can try to print your work out.
Tidak ada komentar:
Write comments