Sometimes HP Deskjet 2135 Printer has a troubleshooting after refiling catridge. But there are some methods to fix the troubleshootingin order to your HP Deskjet 2135 Printer works. Just follow the four step bellow;
You can reset the ink level on HP Deskjet 2135 using four different methods.
First Method:
Switch
on your printer and open the ink cartridge access door. Wait for the
carriage to move to the center. Press the ink cartridge and remove it
from the slot. Remove both the ink cartridges and close the access door.
S
witch
off your printer and switch it back on. Repeat this step for 5 times.
Your printer will record the “No Ink Cartridge” message and erases the
old ink level record.
N
ow insert the ink cartridge and use the printer.
Second Method:
While pressing the Power button, press the Cancel button to reset the ink level on your printer.
Third Method:
Stick
adhesive tapes on both sides of the ink cartridge. Open the ink
cartridge access door and insert the ink cartridge into the slot.
Y
our
printer will display an error message. Ignore it and print an alignment
page. If it prints the alignment page, continue using the printer.
Fourth Method:
Reset
your printing system. With the printer turned on, plug out the power
cord from your printer. By doing so, you are resetting the printer
system. Plug in the power cord after a while and turn on the printer.
Wait for the printer to settle down and check the ink level.
Seek the help of experts if none of the above steps work.
Share this information if this work.
Tidak ada komentar:
Write comments